Go to Post I found another student once at a Cross Country meet because she was wearing a team shirt. I must say, I was surprised. I should start wearing my team shirt around more often. - TheBoulderite [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rate Thread Display Modes
  #31   Spotlight this post!  
Unread 29-01-2010, 10:56
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,798
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Re: pre-charged Pneumatics

Quote:
Originally Posted by Ether View Post
According to that definition transformers, inductors, loop antennas, resolvers, servo motors, and even any wire that has a loop in it anywhere on the robot would be a "solenoid".

So that can't be the definition that GDC is using.


~
Ether,
Any transformers on the robot would be LAN isolation devices and allowed as part of the supplied control system, there are no loop antennas as the Wireless bridge has two dipole antennas and is also part of the supplied control system. Inductors and other large coils of wire as well as servos fit into the allowed motors section of the rules or are part of the supplied control system boost/buck power supplies. While loops in wire are effectively solenoids, straightening the loop will not result in a change of function nor is the magnetic field useful so these have been ignored in the past as cosmetic.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
  #32   Spotlight this post!  
Unread 29-01-2010, 10:59
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,798
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Re: pre-charged Pneumatics

Quote:
Originally Posted by dlavery View Post
That is not correct. One or more GDC members have been on almost every inspector telecon of which I am aware for the past several years. They may not loudly proclaim their presence, because it is an Inspectors Telecon not a GDC call. But they have been there.
Dave,
As you are lurking here, I would hope that the GDC is at least discussing this inspection process as it applies to sizing, "self supporting" and charged/powered/deflected inspections. I am always available for discussion.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
  #33   Spotlight this post!  
Unread 29-01-2010, 11:14
Alan Anderson's Avatar
Alan Anderson Alan Anderson is offline
Software Architect
FRC #0045 (TechnoKats)
Team Role: Mentor
 
Join Date: Feb 2004
Rookie Year: 2004
Location: Kokomo, Indiana
Posts: 9,113
Alan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond reputeAlan Anderson has a reputation beyond repute
Re: pre-charged Pneumatics

The prohibition is not against solenoids, but against ELECTRIC SOLENOID ACTUATORS. Solenoids might just be a coiled wire carrying current, but adding the word "actuator" makes the intent clear to me. If powering your electromagnet results in a piece of the robot moving, it breaks the rule.
  #34   Spotlight this post!  
Unread 29-01-2010, 11:15
MrForbes's Avatar
MrForbes MrForbes is offline
Registered User
AKA: Jim
FRC #1726 (N.E.R.D.S.)
Team Role: Mentor
 
Join Date: Feb 2006
Rookie Year: 2006
Location: Sierra Vista AZ
Posts: 6,033
MrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond reputeMrForbes has a reputation beyond repute
Re: pre-charged Pneumatics

Thanks Alan, that's exactly what I though, but I could not find the words.
  #35   Spotlight this post!  
Unread 29-01-2010, 11:23
Ether's Avatar
Ether Ether is offline
systems engineer (retired)
no team
 
Join Date: Nov 2009
Rookie Year: 1969
Location: US
Posts: 8,125
Ether has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond repute
Re: pre-charged Pneumatics

Quote:
Originally Posted by Al Skierkiewicz View Post
Ether,
Any transformers on the robot would be LAN isolation devices and allowed as part of the supplied control system, there are no loop antennas as the Wireless bridge has two dipole antennas and is also part of the supplied control system. Inductors and other large coils of wire as well as servos fit into the allowed motors section of the rules or are part of the supplied control system boost/buck power supplies. While loops in wire are effectively solenoids, straightening the loop will not result in a change of function nor is the magnetic field useful so these have been ignored in the past as cosmetic.
I agree with the above. The GDC use of the word "solenoid" does not include any of these devices.



~
  #36   Spotlight this post!  
Unread 29-01-2010, 11:45
Ether's Avatar
Ether Ether is offline
systems engineer (retired)
no team
 
Join Date: Nov 2009
Rookie Year: 1969
Location: US
Posts: 8,125
Ether has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond repute
Re: pre-charged Pneumatics

Quote:
Originally Posted by Alan Anderson View Post
The prohibition is not against solenoids, but against ELECTRIC SOLENOID ACTUATORS. Solenoids might just be a coiled wire carrying current, but adding the word "actuator" makes the intent clear to me. If powering your electromagnet results in a piece of the robot moving, it breaks the rule.
That's probably the clearest way to state it, and seems consistent with all posts by GDC to date (as updated this morning).


~
  #37   Spotlight this post!  
Unread 29-01-2010, 11:50
Jon Stratis's Avatar
Jon Stratis Jon Stratis is offline
Mentor, LRI, MN RPC
FRC #2177 (The Robettes)
Team Role: Mentor
 
Join Date: Feb 2007
Rookie Year: 2006
Location: Minnesota
Posts: 3,835
Jon Stratis has a reputation beyond reputeJon Stratis has a reputation beyond reputeJon Stratis has a reputation beyond reputeJon Stratis has a reputation beyond reputeJon Stratis has a reputation beyond reputeJon Stratis has a reputation beyond reputeJon Stratis has a reputation beyond reputeJon Stratis has a reputation beyond reputeJon Stratis has a reputation beyond reputeJon Stratis has a reputation beyond reputeJon Stratis has a reputation beyond repute
Re: pre-charged Pneumatics

Another real-world example to put to the test. A team is using surgical tubing to provide all the force for their kicker - thus, when "charged", there is a lot of stored energy in the tubing. To "charge" the kicker, they use a cam driven by a motor. The assumption here is the cam is set up such that it can stop in a "fully charged" state, and by turning as little as a few degrees provide a rather explosive discharge of energy through the kicker - requiring another full revolution to become fully charged again. Note that for the kicker to be "fully charged", the robot does not need to be powered on, assuming the cam is difficult/impossible to back drive.

During play, the expectation would be that a kick would simply be a full revolution of the cam - go from fully charged, to kicking, to fully charged again. In the "default state", the code would always return it to fully charged, and within the frame perimeter, to avoid penalties and the yellow card mentioned for the 2-second rule. This is a relatively stable system - the kicker can return inside the frame quickly, and while not in use will remain there should power be lost on the robot. (of course, if power is lost the the half second immediately following a discharge, the kicker may remain outside the frame, but this would be a rather exceptional circumstance)

To be in compliance with the rules, such a robot would have to arrive on the field "fully charged" - carrying it as such would not be safe without redundant safety measures to ensure it couldn't fire if the cam was jostled too much, and hopefully EVERY team with such a system would have safety devices in place.

For inspection, the sizing portion would have to be done in this "fully charged" configuration. During such an inspection, would the inspectors permit (or hopefully require) the safety mechanisms to be in place during sizing? Would they allow them to be removed after the robot was placed on the scale (but before the weight reading was taken)? Depending on robot design, such safety mechanisms may have to be fairly significant (fairly large weight) if, for example, a simple pin (fairly lightweight) can't be used due to access restrictions from other parts. The addition of a single pound of safety equipment on the robot may be enough to put teams over the limit.

Please note - the concern here isn't over safety (the assumption is all proper actions have been taken to ensure the device is safe when being handled), it's not over penalties or the 2-second rule, and it's not over the actual operation of the robot on the field. It is simply in ensure that teams can be safely inspected while having a consistent understanding of what can and cannot be done while weighing and sizing the robot.
  #38   Spotlight this post!  
Unread 29-01-2010, 12:15
Unsung FIRST Hero
Mike Betts Mike Betts is offline
Electrical Engineer
no team
Team Role: Engineer
 
Join Date: Dec 2001
Rookie Year: 1995
Location: Homosassa, FL
Posts: 1,442
Mike Betts has a reputation beyond reputeMike Betts has a reputation beyond reputeMike Betts has a reputation beyond reputeMike Betts has a reputation beyond reputeMike Betts has a reputation beyond reputeMike Betts has a reputation beyond reputeMike Betts has a reputation beyond reputeMike Betts has a reputation beyond reputeMike Betts has a reputation beyond reputeMike Betts has a reputation beyond reputeMike Betts has a reputation beyond repute
Re: pre-charged Pneumatics

Eagle,

Unless you want to post your question to the GDC, we inspectors will not have a definitive answer for quite a while.

Let me suggest this: Volunteer to be an inspector at your regional (they always need more volunteers).

Furthermore, volunteer to work the sizing box and scale.

You need to process 60 robots in just a couple of hours (everyone waits until the last minute) and 30 to 40% will require multiple trips to your station...

Keep in mind it's not just you. it's 60 teams of students that are putting the robot into the box and onto the scale. One of them might include your son or daughter...

Now, what would you feel comfortable with?

Regards,

Mike
__________________
Mike Betts

Alumnus, Team 3518, Panthrobots, 2011
Alumnus, Team 177, Bobcat Robotics, 1995 - 2010
LRI, Connecticut Regional, 2007-2010
LRI, WPI Regional, 2009 - 2010
RI, South Florida Regional, 2012 - 2013

As easy as 355/113...
  #39   Spotlight this post!  
Unread 29-01-2010, 12:35
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,798
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Re: pre-charged Pneumatics

Eagle,
It would seem that a simple application of surgical tubing in front of the kicker in your example would prevent it from extending beyond the FRAME PERIMETER and still allow sizing with the kicker in the fired (non-deflected) state. This is the requirement we used in your first year although only one or two robots used a system like this in Minnesota that year. As I remember it was one of the Cat teams who had discussed this with me prior to the regional and had it corrected by the time they were inspected. This is also an excellent example of Mike's previous post about needing a locking pin to hold the mechanism in place while moving the robot to the field. Although for the life of me, I cannot see a good reason that a team would need to pre charge this device before a match begins unless it takes many seconds to charge. The safety to students and field personnel in the event of an accidental discharge staggers the imagination.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
  #40   Spotlight this post!  
Unread 29-01-2010, 12:46
Ether's Avatar
Ether Ether is offline
systems engineer (retired)
no team
 
Join Date: Nov 2009
Rookie Year: 1969
Location: US
Posts: 8,125
Ether has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond repute
Re: pre-charged Pneumatics

Quote:
Originally Posted by Al Skierkiewicz View Post
It would seem that a simple application of surgical tubing in front of the kicker in your example would prevent it from extending beyond the FRAME PERIMETER...
Robots hanging from the tower at the end of a match may have their undersides exposed. Safety must extend inside the frame perimeter as well.

Just my 2cents.


~
  #41   Spotlight this post!  
Unread 29-01-2010, 13:13
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,798
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Re: pre-charged Pneumatics

The surgical tubing would simple be holding the kicker inside the frame, it should not need any unsafe deflection to do so.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
  #42   Spotlight this post!  
Unread 29-01-2010, 13:38
Vikesrock's Avatar
Vikesrock Vikesrock is offline
Team 2175 Founder
AKA: Kevin O'Connor
no team
Team Role: Engineer
 
Join Date: Mar 2006
Rookie Year: 2007
Location: Manchester, NH
Posts: 3,305
Vikesrock has a reputation beyond reputeVikesrock has a reputation beyond reputeVikesrock has a reputation beyond reputeVikesrock has a reputation beyond reputeVikesrock has a reputation beyond reputeVikesrock has a reputation beyond reputeVikesrock has a reputation beyond reputeVikesrock has a reputation beyond reputeVikesrock has a reputation beyond reputeVikesrock has a reputation beyond reputeVikesrock has a reputation beyond repute
Send a message via AIM to Vikesrock Send a message via MSN to Vikesrock Send a message via Yahoo to Vikesrock
Re: pre-charged Pneumatics

Quote:
Originally Posted by Al Skierkiewicz View Post
The surgical tubing would simple be holding the kicker inside the frame, it should not need any unsafe deflection to do so.
I believe the point was that the danger of an accidentally fired kicker is not restricted to whether or not it leaves the frame perimeter. During removal of the robot from the tower hands may be placed inside the frame perimeter and within danger of a moving kicker device.

I believe this example helps prove the superior safety of a rigid restraint as suggested by eagle33199.

I also fail to see how surgical tubing can restrain a kicker within the frame perimeter without compromising the energy being imparted in the portion of the kick taking place between the edge of the frame perimeter and the edge of the bumper perimeter.

If a rigid restraint system (locking pin, harness, etc.) is recommended when transporting the robot, it would seem to me that it would also be prudent to keep this safety system in place for as much of the inspection process as possible, including during the jostling as the robot is inserted into, and removed from, the sizing box. As long as the device can be shown to remain inside the frame perimeter with the device removed (while not being jostled and while everyone is clear of the kicker) there should be no rules issues here.

Removing such a device for weighing should also fall well within the rules as it is not part of the robot when the robot is in the NORMAL CONFIGURATION on the field.
__________________


2007 Wisconsin Regional Highest Rookie Seed & Regional Finalists (Thanks 930 & 2039)
2008 MN Regional Semifinalists (Thanks 2472 & 1756)
2009 Northstar Regional Semifinalists (Thanks 171 & 525)
  #43   Spotlight this post!  
Unread 29-01-2010, 14:38
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,798
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Re: pre-charged Pneumatics

Kevin,
I was addressing the fear that a kicker that is not in firing position would fall outside the frame perimeter during inspection. A small piece of tubing would suffice for that purpose.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
  #44   Spotlight this post!  
Unread 29-01-2010, 14:51
Ether's Avatar
Ether Ether is offline
systems engineer (retired)
no team
 
Join Date: Nov 2009
Rookie Year: 1969
Location: US
Posts: 8,125
Ether has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond reputeEther has a reputation beyond repute
Re: pre-charged Pneumatics

Quote:
Originally Posted by Al Skierkiewicz View Post
Kevin,
I was addressing the fear that a kicker that is not in firing position would fall outside the frame perimeter during inspection. A small piece of tubing would suffice for that purpose.
<<A small piece of tubing would suffice for that purpose>>


Many teams are using surgical tubing for kicking. After kicking, they require substantial force to retract.



~
  #45   Spotlight this post!  
Unread 29-01-2010, 14:53
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,798
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Re: pre-charged Pneumatics

Quote:
Originally Posted by Ether View Post
Many teams are using surgical tubing for kicking. After kicking, they require substantial force to retract.~
We don't know that yet.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
I was charged to ship robot home from Atlanta Sunshine General Forum 15 29-04-2008 16:14
Beginning of Match - Charged tank jdejoannis Pneumatics 6 30-01-2007 21:20
Using pre-charged accumulators Peter Matteson Pneumatics 8 14-02-2006 10:42
2006 Pre-Kickoff FF? Billfred Fantasy FIRST 37 29-07-2005 11:11
Charged 7.2 battery Daniel Brim Electrical 2 01-02-2004 10:46


All times are GMT -5. The time now is 22:23.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi