|
|
|
 It is not your banners that make you nor the trophies that line your walls. It is the willingness to be brave in the face of defeat and compassionate in the winds of victory that create you. - MysterE [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#7
29-01-2010, 15:46
|
||||
|
||||
|
Re: Spike relay code not working
Once again, what is telling you that the spike is not working?
When you say it isn't doing anything, do you mean that there is no light, or that the light is not changing color? If there is no light, then it is a wiring problem. The relay is not connect to the PDB properly, the relay is not set properly (or is blown), or the PWM cable is not properly attached. If there is a light and it is not changing color, then you know that it is a coding problem. As for digital output- no. If the fan is attached to a spike, then the PWM cable should go to a relay output on the side car, and you should use the relay code. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| C++ Sample Code not working... | hm29168 | CAN | 5 | 27-01-2010 20:59 |
| Not Really Working Vision Code | linkhyrule5 | NI LabVIEW | 0 | 07-01-2010 18:45 |
| Incrementation Code not working | benhulett | Programming | 6 | 12-02-2007 17:39 |
| 2007 demo code not working | thefro526 | Programming | 4 | 12-01-2007 23:43 |
| Camera code not working.... | DemonYawgmoth | Programming | 5 | 11-02-2006 09:21 |
Threaded Mode