No camera images on Driver Station - Page 2

EncodersRUS · #16 29-01-2010, 21:31

Happily enough, everything seems to be working at full capacity now!
Thank you everyone!

Team_136 · #17 02-02-2010, 15:14

We're having an issue were the green light on the cRIO port 2 does not turn on when we connect the camera to it. How can we get the port 2 to work?

Alan Anderson · #18 02-02-2010, 15:46

Quote:

Originally Posted by Team_136

We're having an issue were the green light on the cRIO port 2 does not turn on when we connect the camera to it. How can we get the port 2 to work?

Neither the cRIO nor the camera have "autosensing" Ethernet ports. You must use a crossover cable to connect them. (The one in the Kit of Parts was listed as orange, but I think ours was pink.)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2010 Driver Station Netbook Driver Account and Java	joshholat	FRC Control System	2	10-01-2010 15:04
Capturing Camera Images to cRIO	mgoodell6	Programming	4	26-03-2009 07:24
Driver Station	dnrobotics11	Control System	2	18-02-2009 21:35
Camera and driver station	viperred396	General Forum	8	05-02-2009 10:12
Driver Station - Camera Feedback	sranton	Technical Discussion	4	13-01-2009 12:50