|
|
|
 dont be afraid of new technology. embrace it and experment with it figure out the problems on the way and then tell us about it so it gets easier. - Tytus Gerrish [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| dont be afraid of new technology. embrace it and experment with it figure out the problems on the way and then tell us about it so it gets easier. - Tytus Gerrish [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
SAFETY WARNING: <R77> 125 psi Pressure Relief Valve
Our team has just discovered this morning that the Norgren "125" psi relief valve as supplied in the KoP was NOT calibrated to 125 psi.
We took it up to 160psi and it did not release. Rule <R77> states in bold letters that Teams are not allowed to adjust the 125-psi relief valve. The "Pneumatics Manual" at the USFIRST website says nothing about adjusting this valve. Are other teams aware of this potential safety issue? ~ |
|
#2
30-01-2010, 12:58
|
|||||
|
|||||
|
Re: SAFETY WARNING: <R77> 125 psi Pressure Relief Valve
Please continue this discussion on the thread in pneumatics: http://www.chiefdelphi.com/forums/sh...ad.php?t=81485
(Because it's a potential hazard, I elected not to delete the duplicate post) |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 120 psi pressure reliefg valve | falconmaster | General Forum | 5 | 31-01-2010 01:06 |
| Adjustable pressure relief valve? | ayeckley | Pneumatics | 18 | 29-01-2010 14:46 |
| 120 psi Main Relief Valve not functioning | Clifford | Pneumatics | 10 | 11-02-2008 22:29 |
| Calibration of pressure relief valve | d235j | Pneumatics | 3 | 16-01-2008 14:12 |
| Need the number for the Norgren Pressure relief valve | Jack21 | Pneumatics | 0 | 23-01-2004 16:32 |
(since 2004)
Linear Mode
