Strange download errors

[gamemonk0]

Originally Posted by Ken Streeter

The most likely problems are either (1) lack of network connectivity to the cRIO or (2) incorrect setting of the FIRST Downloader preferences in Wind River Workbench or (3) no compiled executable.

I would suggest investigating each of these as follows:

(1) Verify network connectivity to the cRIO. This is most easily done by trying to "ping" the cRIO from your PC. To do this, start up a command prompt on Windows, and enter "ping 10.1.51.2" You should get a series of four successful responses indicating "Reply from 10.1.51.2..." If you instead get a series of four "Request timed out." responses, your problem is with network connectivity to the cRIO.

(2) Check the settings of the FIRST Downloader preferences in Wind River Workbench. For information on how to do this, see the "Deploying the C/C++ Program" section of the "C Programming Guide for FRC" (This is on page 26 as of revision 0.75 of this document)

(3) It may be the case that your code didn't compile and that you have no executable file to download. Look to see if the file specified for use in the FIRST Downloader actually exists.

Please let us know if you manage to get past this, and, if so, what the problem was! If none of the above work, post that, too; maybe others will have additional suggestions.

It was the subnet mask that was the issue, I think. Once we changed the subnet mask, then everything started to work again. Thanks a lot.

[gvarndell]

Following up on a thread started nearly a year ago...

Originally Posted by gamemonk0

It was the subnet mask that was the issue, I think. Once we changed the subnet mask, then everything started to work again. Thanks a lot.

Seriously though, thanks for following up.
Better late than never.
Too many dangling threads here.
Makes searching for solutions turn up way too many unresolved problems.