The 2nd Joystick must DIE

[jhersh]

Originally Posted by Hadi379

Can someone look at my telop code and let me know if this is correct. I thought I was on the right track, but from other posts on here, I decided to go another route. The image of the telop.vi is attached. Sorry for the poor resolution, but i had to make the file size small enough. Thanks....

It looks reasonable, but there is an easier way to convert from cartesian to polar (the magnitude and direction). In the palette under Programming >> Numeric >> Complex choose "Re/Im to Polar". This VI does all that math internally. The output is in radians, so you still need the conversion to degrees.

In the next update there will also be a VI that takes cartesian inputs so you can wire your joystick up directly.

As for the poor resolution, you should use jpg or png, not bmp. bmp is basically just a raw image with no compression.