|
|
|
 Uh. Oh. Wildstang is simple and has a swerve. Where have I seen that before? - EricH [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Uh. Oh. Wildstang is simple and has a swerve. Where have I seen that before? - EricH [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
31-01-2010, 16:55
|
|||||
|
|||||
|
Re: Tilt Sensor
From the data sheet:
Operating angle: Tilt of 50 to 80 degrees, when the switch is tilted gradually (approx. 1 degree/s) from the horizontal Returning angle Tilt: of more than 25 degrees, when the switch is tilted gradually (approx. 1 degree/s) from the horizontal Just guessing....Looks like it is a switch, the contacts will open when you tilt it at least 50 degrees, but no more than 80 degrees, from horizontal. And they will close again by the time it gets back to having only 25 degrees tilt. This is what happens for slow tilting action, changing one degree per second. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Compass tilt error | knine143 | Sensors | 2 | 29-05-2008 07:58 |
| tilt/pan away | Tangello_angela | Programming | 4 | 24-01-2007 16:20 |
| Robots tilt | Booger | Technical Discussion | 19 | 19-07-2006 10:01 |
| Grabbing Tilt Angle? | crossedheart | Programming | 7 | 09-02-2006 03:08 |
| Tilt Troubles | Mumford 406 | Programming | 4 | 29-03-2005 22:19 |
Threaded Mode