Driver Station Program Just stopped updating its ip

[Must Be Drama]

from 10.0.0.2 to our teams ip; i tried reinstalling the program and it doesnt work; and since we need it to enable/disable we cant do squat without it;
i know i got communication with the robot because labview can still deploy to it; any helpp?? and yes we have the newest ip;

[Radical Pi]

Log into the developer account and manually set a static IP to 10.3.54.5 with a subnet mask of 225.225.225.0

If you don't know how it says how multiple times in the control system setup instructions. Google can also help you

[Jason Law]

Originally Posted by Radical Pi

Log into the developer account and manually set a static IP to 10.3.54.5 with a subnet mask of 225.225.225.0

I believe that the subnet mask should be 255.0.0.0 per the control system manual...

http://www.usfirst.org/uploadedFiles...ed-Rev-0.7.pdf

Originally Posted by Must Be Drama

from 10.0.0.2 to our teams ip; i tried reinstalling the program and it doesnt work; and since we need it to enable/disable we cant do squat without it;
i know i got communication with the robot because labview can still deploy to it; any helpp?? and yes we have the newest ip;

Look at pg. 32. They give examples and tell you about the IP addressing.

Hope this helps.

[Radical Pi]

Originally Posted by Jason Law

I believe that the subnet mask should be 255.0.0.0 per the control system manual...
Hope this helps.

Oops, my mistake. 225.0.0.0 is right