camera????

[timytamy]

The default user name should be "root: and password should be "pass" (without the quotes) If that doesn't work try reseting it with the small black button on the back and try connecting to it again (default ip should be 192.168.0.90)

If that still doesn't work can we have more details please.

Thanks,
timytamy

What code are you using to run the camera...We can't seem to get ours to stream video to the driver station. We tried the cameratoDashboard example But that had a ton of compile errors..once we cleaned those up we could download but not get any video...We tried both the axiscamera.h file and the the axiscamera2010.h files in our program but no luck. We noticed that the code for the trackingdemo compiled without any problem but the code so different from the cameratodashboard example we are having a hard time translating...Can anyone steer us in the right direction?? I am sure it is something obvous that we just aren't seeing.

BC

[CrashOverride]

Originally Posted by bcieslak

What code are you using to run the camera...We can't seem to get ours to stream video to the driver station. We tried the cameratoDashboard example But that had a ton of compile errors..once we cleaned those up we could download but not get any video...We tried both the axiscamera.h file and the the axiscamera2010.h files in our program but no luck. We noticed that the code for the trackingdemo compiled without any problem but the code so different from the cameratodashboard example we are having a hard time translating...Can anyone steer us in the right direction?? I am sure it is something obvous that we just aren't seeing.

BC

Initially we had problems getting the 2010CameraDemo in C++ to run, it turned out that the problem was with the driver station. We found that the installer for the required update needs to be run, uninstalled then reinstalled. You will know that the station is updated properly if the Gyro Compass shows up on the display.

Good Luck.