|
|
|
 I'll not deprive you of the practice in reading the manual; you'll need it if you want to be an effective part of an FRC team. - Alan Anderson [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I'll not deprive you of the practice in reading the manual; you'll need it if you want to be an effective part of an FRC team. - Alan Anderson [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
01-02-2010, 09:30
|
|||||
|
|||||
|
Re: Holonomic drive angle?
You may want to display the output that that code provides.
Our testing indicated that when you connect joystick outputs into the "obvious" inputs of the rectangular to polar conversion, it produces a zero angle when the joystick was moved to the right (logical for a normal math chart) and of course, forward and backwards was reversed because of the stupid forward = -ve orientation of the joysticks. So I suggest normalizing you joystic outputs to generate +/-1 with propper cartesian (rectangular) orientation first... It's too bad that the holomonic function doesn't adopt a more mathematically correct (standard) input... eg orientation and units. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Holonomic Drive Example? | I am error | NI LabVIEW | 9 | 12-02-2010 15:32 |
| Holonomic Drive Help | star_lancer | NI LabVIEW | 2 | 01-02-2010 22:39 |
| Switching to Holonomic Drive | MachineSMMC | NI LabVIEW | 1 | 22-01-2010 13:07 |
| Holonomic Drive Question | Jeff Waegelin | Technical Discussion | 12 | 20-11-2005 21:23 |
| Holonomic Drive Mathmatics Discussion | robotaddict | Programming | 35 | 15-10-2005 13:29 |
Threaded Mode