Need help with tank drive

[zebrabots]

We are also having problems with our robot... When we download our program (which is tank drive) it only uses one joystick... Do you have an idea how we can fix this...

Thanks for your help Zebrabots

[zebrabots]

Thanks for the reply... I am sorry that the pictures wont fit one to one screen shot because i have to swich computers...

Here they are:


It continues into another screenshot

[zebrabots]

Here is the rest

[Alan Anderson]

Originally Posted by zebrabots

We are also having problems with our robot... When we download our program (which is tank drive) it only uses one joystick... Do you have an idea how we can fix this...

How does the robot behave when you move the joystick in various directions?
How are you downloading it?
Have you tried clicking the "run" arrow on the Robot Main vi and using probes to see what values are being fed to the Tank Drive inputs?

[Joe Ross]

Originally Posted by zebrabots

We are also having problems with our robot... When we download our program (which is tank drive) it only uses one joystick... Do you have an idea how we can fix this...

Out of curiosity, have you installed the mandatory LabVIEW Update 2.0?

[tbuo1]

Hi everyone!

I am trying to get tank drive too, but my .vi files look completely different than the ones showed above. What did I do wrong? I installed the Update2.0 according to the instructions online. Please help!

Thank you!

[Alan Anderson]

Originally Posted by tbuo1

I am trying to get tank drive too, but my .vi files look completely different than the ones showed above.

The code posted by zebrabots has had a lot of things changed and added from the default project. Don't worry if yours doesn't end up looking at all like it.

[tbuo1]

I think the original .vi that the Zebras used to code was different. When I read other peoples posts, it seems as though they are using a different version or framework than I have. My original teleop.vi looks like this:

http://decibel.ni.com/content/thread/5882?tstart=0

(the picture at the bottom)

My other .vi Team Code, such as begin.vi, are different than ones I've seen people post about as well. I'm new to LABVIEW and I am not sure what is going on, haha.

Thanks for your help!

[Alan Anderson]

Originally Posted by tbuo1

I think the original .vi that the Zebras used to code was different.

It looks to me like it started out with exactly the same structure, but has had most of the guts removed and replaced with the team's own code.

Your picture on the NI site looks like what I remember as an unmodified default Teleop vi. (The comment about button 2 next to the Gyro Reset block doesn't match what I think the code actually does, but I don't know whether my memory is playing tricks on me or not.)

[zebrabots]

The joystick acts as though it was in arcade mode and only used one joystick.

Do I not have the most updated version??? My partner says that he has updated it.

We put the code on via build under the build specifications tab. We have not tried to click run and see if it works.

Thanks for the quick responses everyone.
I am sorry that I have not been able to get back on sooner because of school.

Zebrabots programmer TyAdley

[Joe Ross]

Originally Posted by zebrabots

We put the code on via build under the build specifications tab. We have not tried to click run and see if it works.

Build only compiles the program on your local PC. You need to click Run as Startup to download it to the cRIO (both are required each time you change anything). Alternately, for debugging, you can click the run button in Robot Main.

[zebrabots]

ok thanks for the help we will be sure to try this as soon as we fix our program.