Need help with tank drive

[tbuo1]

I think the original .vi that the Zebras used to code was different. When I read other peoples posts, it seems as though they are using a different version or framework than I have. My original teleop.vi looks like this:

http://decibel.ni.com/content/thread/5882?tstart=0

(the picture at the bottom)

My other .vi Team Code, such as begin.vi, are different than ones I've seen people post about as well. I'm new to LABVIEW and I am not sure what is going on, haha.

Thanks for your help!

[Alan Anderson]

Originally Posted by tbuo1

I think the original .vi that the Zebras used to code was different.

It looks to me like it started out with exactly the same structure, but has had most of the guts removed and replaced with the team's own code.

Your picture on the NI site looks like what I remember as an unmodified default Teleop vi. (The comment about button 2 next to the Gyro Reset block doesn't match what I think the code actually does, but I don't know whether my memory is playing tricks on me or not.)

[zebrabots]

The joystick acts as though it was in arcade mode and only used one joystick.

Do I not have the most updated version??? My partner says that he has updated it.

We put the code on via build under the build specifications tab. We have not tried to click run and see if it works.

Thanks for the quick responses everyone.
I am sorry that I have not been able to get back on sooner because of school.

Zebrabots programmer TyAdley

[Joe Ross]

Originally Posted by zebrabots

We put the code on via build under the build specifications tab. We have not tried to click run and see if it works.

Build only compiles the program on your local PC. You need to click Run as Startup to download it to the cRIO (both are required each time you change anything). Alternately, for debugging, you can click the run button in Robot Main.

[zebrabots]

ok thanks for the help we will be sure to try this as soon as we fix our program.