Go to Post There is something to be learned (sometimes hard to find) from everyone you meet. - wireties [more]
Home
Go Back   Chief Delphi > Technical > Programming
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 14-01-2010, 14:51
JesterKarrde JesterKarrde is offline
Registered User
AKA: Grant P. Garner
FRC #3413 (Cowboys)
Team Role: Teacher
 
Join Date: Dec 2009
Rookie Year: 2009
Location: Coppell, TX
Posts: 3
JesterKarrde is an unknown quantity at this point
2010 Axis Camera Dashboard Problems

We are a rookie team this year so this is all very new to us. When trying to set up the camera for our robot, we ran into various problems. After some work we managed to do what the documentation said to do to the camera. We then ran the account set up on the camera that was included in the software. After plugging it in to port two, we still could not pull it up on the dashboard. Is their anything on the code I need to change as well? Or is it something to do with the set up of the camera?
  #2   Spotlight this post!  
Unread 14-01-2010, 14:56
s133p s133p is offline
Registered User
FRC #0675
 
Join Date: Jan 2010
Location: Sebastopol
Posts: 12
s133p is an unknown quantity at this point
Re: 2010 Axis Camera Dashboard Problems

As far as I know, no one has gotten it working (With the exception of one reported java success).

You might want to take a look in my thread with almost the same name where we are discussing this: http://www.chiefdelphi.com/forums/sh...ad.php?t=79935
  #3   Spotlight this post!  
Unread 14-01-2010, 18:04
woodk woodk is offline
Registered User
FRC #2809
 
Join Date: Jan 2009
Location: Kingston, Ontario, Canada
Posts: 31
woodk has a spectacular aura aboutwoodk has a spectacular aura aboutwoodk has a spectacular aura about
Re: 2010 Axis Camera Dashboard Problems

I did finally get it working today. The biggest issue I had is that the DSupdate did not update the dashboard. I only noticed because I installed the update on a second laptop and it looked different. I went back and checked the file date and it was not the same on the classmate. I had to run the DSupdate program, but tell it to uninstall, then run it again and install. Now it works.

THere were also a couple of problems with the C++ examples:

CameraToDashboardExample and SimpleTracker needed:

- right-click on the project and select Properties
- select the "Build Paths" tab
- click "Add"
- enter: -I$(WIND_BASE)/target/h/WPILib/Vision2009

CameraToDashBoardExample needed:

- open "cameraToDashboardExample.cpp"
- add: #include "WPILib.h"

Good luck!

- Kevin
  #4   Spotlight this post!  
Unread 14-01-2010, 20:07
JesterKarrde JesterKarrde is offline
Registered User
AKA: Grant P. Garner
FRC #3413 (Cowboys)
Team Role: Teacher
 
Join Date: Dec 2009
Rookie Year: 2009
Location: Coppell, TX
Posts: 3
JesterKarrde is an unknown quantity at this point
Re: 2010 Axis Camera Dashboard Problems

That's very interesting I will have to check that. Any idea if that problem might also apply to LabView?

EDIT: After looking at what you said, we actually do have the current version of the driver's station installed.

Last edited by JesterKarrde : 14-01-2010 at 20:19.
  #5   Spotlight this post!  
Unread 16-01-2010, 15:48
umangv620 umangv620 is offline
Programming Captain
AKA: Umang
FRC #1403 (Cougar Robotics)
Team Role: Programmer
 
Join Date: Jan 2010
Rookie Year: 2008
Location: New Jersey
Posts: 80
umangv620 will become famous soon enoughumangv620 will become famous soon enough
Re: 2010 Axis Camera Dashboard Problems

Are we supposed to code the Dashboard so that it can grab the camera feed, or does it do that itself?

Also has anyone gotten the camera working in LabView?(so that you can view the camera feed in LabView). We are having problems with this, so any help or link to any documentation on this would be very helpful.
  #6   Spotlight this post!  
Unread 16-01-2010, 17:00
LinuxArchitect LinuxArchitect is offline
Registered User
AKA: George Boyce
FRC #0053 (Cow Abductors)
Team Role: Mentor
 
Join Date: Jan 2010
Rookie Year: 2010
Location: Greenbelt MD
Posts: 78
LinuxArchitect is a name known to allLinuxArchitect is a name known to allLinuxArchitect is a name known to allLinuxArchitect is a name known to allLinuxArchitect is a name known to allLinuxArchitect is a name known to all
Re: 2010 Axis Camera Dashboard Problems

Software updates are listed on the FIRST website, leading you to the mandatory update of the driver station software. This is either a new install on a new development laptop, or an upgrade to an existing laptop or the classmate.

HOWEVER, the update will break the camera display on the dashboard (assuming it was ever working). So, when you get to the install screen that lists the software, click on the dashboard option and choose to NOT install it on the computer. This will cause the "install" to uninstall the software. Then rerun the install again.

If you did it right, the dashboard should show the camera images automagically.
  #7   Spotlight this post!  
Unread 03-02-2010, 10:40
whcirobotics's Avatar
whcirobotics whcirobotics is offline
Registered User
FRC #1514 (Vikings)
 
Join Date: Nov 2008
Rookie Year: 2009
Location: WHCI
Posts: 174
whcirobotics is an unknown quantity at this point
Re: 2010 Axis Camera Dashboard Problems

I am missing the dashboard when i start the classmate pc. And when i go in developer mode and open dashboard.exe, i see no picture. My camera is configured perfectly, becasue i can see live feed from 192.168.0.90, but not from dashboard.exe plz help thank you

-Chinmay
  #8   Spotlight this post!  
Unread 03-02-2010, 16:00
byteit101's Avatar
byteit101 byteit101 is offline
WPILib maintainer (WPI)
AKA: Patrick Plenefisch
no team (The Cat Attack (Formerly))
Team Role: Programmer
 
Join Date: Jan 2009
Rookie Year: 2009
Location: Worcester
Posts: 699
byteit101 is a glorious beacon of lightbyteit101 is a glorious beacon of lightbyteit101 is a glorious beacon of lightbyteit101 is a glorious beacon of lightbyteit101 is a glorious beacon of lightbyteit101 is a glorious beacon of light
Re: 2010 Axis Camera Dashboard Problems

in setup, click on local dashboard, and restart the dashboard.
also, make sure you reinstall the dashboard (it should have a compass on the right
__________________
Bubble Wrap: programmers rewards
Watchdog.Kill();
printf("Watchdog is Dead, Celebrate!");
How to make a self aware robot: while (∞) cout<<(sqrt(-∞)/-0);
Previously FRC 451 (The Cat Attack)
Now part of the class of 2016 at WPI & helping on WPILib
  #9   Spotlight this post!  
Unread 03-02-2010, 17:47
whcirobotics's Avatar
whcirobotics whcirobotics is offline
Registered User
FRC #1514 (Vikings)
 
Join Date: Nov 2008
Rookie Year: 2009
Location: WHCI
Posts: 174
whcirobotics is an unknown quantity at this point
Re: 2010 Axis Camera Dashboard Problems

Tnx i got the camera view BUT i have connected wirelessly, all the communication, robot code, and stop botton are green, i can also drive the robot but i can NOT see the image. Yes i have connected the camera to the C-Rio through a crossover and it is working because i went to the ip : 192.168.0.90 and it gives me the live feed. please help US!!!!!!!!!! Much appreaciated

-Chinmay
  #10   Spotlight this post!  
Unread 03-02-2010, 18:05
cooldude8181's Avatar
cooldude8181 cooldude8181 is offline
Registered User
AKA: Charlie Davies
FRC #1245 (Shazbots)
Team Role: Programmer
 
Join Date: Oct 2008
Rookie Year: 2009
Location: Colorado
Posts: 39
cooldude8181 is an unknown quantity at this point
Re: 2010 Axis Camera Dashboard Problems

We have not gotten the camera to work with the drivers station yet either.

I hope someone can figure it out because we need help also.
  #11   Spotlight this post!  
Unread 03-02-2010, 18:19
whcirobotics's Avatar
whcirobotics whcirobotics is offline
Registered User
FRC #1514 (Vikings)
 
Join Date: Nov 2008
Rookie Year: 2009
Location: WHCI
Posts: 174
whcirobotics is an unknown quantity at this point
Re: 2010 Axis Camera Dashboard Problems

Here is the error which i get when i plug the camera in directl to the classmate.
The error:

ERROR <code> -44003 occured at Ca,era.lvib:issue HTTP Request with Authentication.vi>>Camera.lvlib:issue Ger.vi>>Camera.lvlib: Set Image Appearence Property.vi>>Camera.lvlib:Set Enm Appearance Property.vi>>Camera.lvlib:Set Image Size.vi>>Vision Processing.vi>>Rbot Main.vi
<time>17:31:26 02/03/2010
FRC: Operation failed du to a communication failure with the camera.
ERROR<code>-44003 occured at Camera.lvlib:issue HTTP Request with Athentication.vi>>Camera.lvlib:Read JPG.vi>>Camera.lvlib:Acquire Image.vi:1
<time>17:31:23 02/03/2010
FRC: Operation failed due to a communication failure with the camera.
ERROR<code>-44003 occured at Camera.lvlib:issue HTTP Request with Authentication.vi>>Camera.lvlib:Read JPG.vi>>Camera.lvlib: Acquire Image.vi:1
<time>17:31:19 02/03/2010
FRC: Operation failed due to a communication failure with the camera.
No Change to Network Configuration: "Local Area Connection"
I/O unit not detected or not installed correctly.

-Chinmay
  #12   Spotlight this post!  
Unread 04-02-2010, 13:08
CrashOverride's Avatar
CrashOverride CrashOverride is offline
Registered User
FRC #1831
Team Role: Mentor
 
Join Date: Jan 2007
Rookie Year: 2006
Location: Gilford, NH
Posts: 16
CrashOverride is an unknown quantity at this point
Re: 2010 Axis Camera Dashboard Problems

Did you run the "Setup Axis Camera" utility located on the Labview 8.6 menu?

This utility creates a user account on the camera called "FRC" and is the account that all of the available languages, Labview, C++ and Java use to access the camera.
  #13   Spotlight this post!  
Unread 04-02-2010, 13:11
CrashOverride's Avatar
CrashOverride CrashOverride is offline
Registered User
FRC #1831
Team Role: Mentor
 
Join Date: Jan 2007
Rookie Year: 2006
Location: Gilford, NH
Posts: 16
CrashOverride is an unknown quantity at this point
Re: 2010 Axis Camera Dashboard Problems

Quote:
Originally Posted by cooldude8181 View Post
We have not gotten the camera to work with the drivers station yet either.

I hope someone can figure it out because we need help also.
We found that we needed to install the required dashboard update then uninstall it and reinstall it for the camera to function. You will know you have succeeded if the dashboard has the gyro compass on the display.

Good Luck!
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
2010 Camera and vision problems. s133p Programming 76 08-02-2010 21:35
Axis Camera ehochstein Programming 2 21-02-2009 00:16
Problems with the Axis Camera popo308 FRC Control System 16 15-01-2009 19:38
Dashboard and Robot main with Axis camera Team2883 General Forum 9 10-01-2009 07:35
AXIS Camera nickmagus Programming 1 03-01-2009 20:06


All times are GMT -5. The time now is 12:35.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi