Enable Teleop in Robot Main

ThisAintJeff · #1 04-02-2010, 09:12

Is there a way to Enable Telopmode on the screen for Robot Main? because Teleop just closes, and when i deploy Robot Main, it teleop says its waiting for activation.

Joe Ross · #2 04-02-2010, 09:38

That's what the driver station does.

Alan Anderson · #3 04-02-2010, 11:06

Quote:

Originally Posted by ThisAintJeff

Is there a way to Enable Telopmode on the screen for Robot Main?

No, but there is a way to enable the robot from the Driver Station. In fact, you must use the Driver Station application to enable the robot. Click the green "Enable" button on the Operation tab.

ThisAintJeff · #4 04-02-2010, 14:29

wait, so does that mean i cant just deploy the code ive made to the robot, so i have to actually build it to the robot then use the driver station?

Mark McLeod · #5 04-02-2010, 14:33

You can still temporarily deploy your code to the robot, but you must run the Driver Station from the same Developer account as you are running your code.

It's under Windows Start -> All Programs -> FRC Driver Station

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Robot Main.vi	Sauce	NI LabVIEW	6	06-03-2010 01:24
No Robot Main	Robopanda6	Java	2	31-01-2010 18:57
Basic Robot Main vi	chinckley	NI LabVIEW	7	03-03-2009 15:54
Using Robot Main	LiLFiL	Programming	1	14-02-2009 18:51
Coordinating Robot Main VI with Autonomous VI	jjauss	Programming	2	07-02-2009 09:26