|
|
|
 If you want to build a ship, don't drum up people to collect wood and don't
assign them tasks and work, but rather teach them to long for the
endless immensity of the sea.~ Antoine de Saint-Exupery - rjbarra [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Analog Input tied to Accelerometer on Cypress
I've set our driver station up and installed the mandatory update. Now I'm trying to get all the I/O ports confirmed working. I used the PSoC Programmer to load the "FRC_IO.v2.hex", but I have run into a problem. The 8 analog ports displayed on the FRC Driver Station in advanced mode fluctuate with acceleration in the Z axis.
I am not sure if this is a configuration problem or if it is a problem with the hex code itself. Has anyone run into something similar to this? Thanks in advance. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Analog Input Errors... | Tach'ko | Electrical | 1 | 11-01-2008 11:37 |
| HELP: analog input | Tottanka | Programming | 19 | 18-02-2007 19:27 |
| Accelerometer: Analog or Digital? | psquared | Programming | 2 | 10-02-2005 16:38 |
| Accelerometer Wiring/Input | DAN THE MAN | Control System | 1 | 06-02-2005 20:02 |
| Analog Input Trouble | Matt Krass | Programming | 10 | 20-01-2005 21:09 |
Threaded Mode