|
|
|
 No caffine for you! - Koko Ed [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| No caffine for you! - Koko Ed [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Taking Over the Serial Port (C++)
Is there a way to disable stdout to the serial port, and then use it via the SerialPort class (while retaining network console capability?) - I need a dedicated serial port for an LCD screen. Otherwise I would probably have to bit-bang rs-232.
|
|
#2
07-02-2010, 19:00
|
|||
|
|||
|
Re: Taking Over the Serial Port (C++)
The "Console Out" DIP switch on the cRIO controls stdout through the serial port. The network console will work fine no matter how it's set.
Hope this helps. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Serial data out of the programming port | Doug Leppard | Programming | 5 | 07-04-2008 08:53 |
| Does reading from the serial port work? | Alan Anderson | Programming | 16 | 29-01-2008 07:15 |
| Programming the vex microcontroller to respond to commands on the serial port | crashoverride02 | Programming | 1 | 20-10-2006 14:17 |
| Scripting Setup and the Camera + Serial Port Drivers | CJO | Programming | 22 | 11-01-2006 17:42 |
| TTL port to a serial port on a demo board | ImmortalAres | Programming | 16 | 09-07-2005 23:44 |
Linear Mode
