|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Or, can we still use the old KwikByte driver station?
|
|
#2
|
|||||
|
|||||
|
Re: Is the Classmate necessary to control the robot in competition?
Nope, classmate or nothing.
|
|
#3
|
|||
|
|||
|
Re: Is the Classmate necessary to control the robot in competition?
Thanks
![]() On a related note, I really should've read the competition maual before asking that question -_-" |
|
#4
|
|||
|
|||
|
Re: Is the Classmate necessary to control the robot in competition?
can a diffrent laptop be used instead of the classmate?
|
|
#5
|
|||||
|
|||||
|
Re: Is the Classmate necessary to control the robot in competition?
DRIVER STATION - The collection of the Classmate PC, FirstTouch I/O Module and breadboard provided in the KOP, and a USB hub (either the one provided in the KOP, or a team-supplied USB hub device).
<R83> The Classmate PC must be positioned within the OPERATOR CONSOLE so that the screen display can be clearly seen during inspection and during operation in a MATCH. The Ethernet port on the OPERATOR CONSOLE must be easily and quickly accessible. [remainder of rule left off] <R84> During competition MATCHES, the ARENA Ethernet cable must connect directly to the Ethernet port on the Classmate PC (making a direct connection via a “pigtail” cable is permitted). Only the Classmate PC may connect to the competition cable – no direct connection of team-provided portable computers, PDAs, or alternate devices is permitted. I think the above rules are quite clear: classmate only. Especially note <R84>, second sentence. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How to transfer the Build file to the Classmate | MulletFish | Programming | 3 | 14-01-2010 14:34 |
| Do we have to ship the control system along with the robot on Tuesday? | tennisbeast29 | Rules/Strategy | 3 | 14-02-2009 13:39 |
| can we control the amount of air to control the speed of the cylinder? | Team2339 | Pneumatics | 22 | 11-02-2009 15:33 |
| Control at the competition | Demothesis | Rules/Strategy | 6 | 16-02-2007 14:38 |
| how do you power on the robot control | great_one411 | Electrical | 6 | 04-02-2003 00:46 |