help with LabVIEW framework

[Ether]

Our team is having some difficulty with the LabVIEW framework.

Here are the specifics:

- we built the real time application from the unmodified 2010 FRC Robot project.

- we right-clicked the application in the project explorer window and selected "run as startup"

- when it prompted to re-boot the cRIO we said yes

- the communication and robot code indicator lights on the FRC Driver Station went red (indicating that the cRIO was re-booting)

- the "communication" and "robot code" indicator lights on the Driver Station then turned green. the "stop button" light is yellow (we disabled the stop button)

- the FRC Driver Station indicates (via the diagnostics tab) that our joystick is joystick1.

- we clicked the "enable" button in the FRC Driver Station.

- the lights on the jaguars turned solid yellow.

- when the buttons on the joystick are pressed, the joystick indicator light in the FRC Driver Station diagnostics tab window turns from green to blue.

- BUT, when we move the joystick, the lights on the jaguars do not change.


If the above description lacks necessary detail, please tell us what is missing.


~