help with LabVIEW framework

[Ether]

<<You did apply the LabVIEW and Driver Station updates, right?>>

I did not personally do this, but I have asked more than once and have been assured that the updates were downloaded and applied. I will double-check this tonight (by asking the team) to make sure.

Is there a way to tell for sure that all the updates have been installed, like by looking at "Help About" or something like that?

I just went over to the USFIRST website to double-check this. I see there are 4 updates:

Mandatory LabVIEW Update - posted 09 Jan 2010

Mandatory Driver Station Update/Driver Station Installer (for use on any PC) - posted 09 Jan 2010

Fix for Driver Station Missing 'nicyapi.dll' Issue - posted 11 Jan 2010

CAN/Jaguar Update - posted 11 Jan 2010


Are there any other updates besides those listed above?



<<Do you see any activity on the PWM section of the Dashboard display when you move the joystick?>>

I will have the team check this. They did not have the Dashboard running at the time (we are using an XP laptop for development, not the classmate, because we wanted the classmate to remain "pristine" as advised in the FRC docs)



<<It would help to know what the RSL on the Digital Sidecar is doing, and what the three power status LEDs show.>>

Hate to be so clueless, but what is the RSL? I'm not sure my team will know what this means. Are the power status LEDs located on the power distribution board?


Thanks.

~