|
|
|
 Being a good engineer isn't all about engineering. It's about being able to use engineering for a practical application, and to successfully communicate your research or development results to people who aren't engineers - Jon Stratis [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
08-02-2010, 16:54
|
|||||
|
|||||
|
Re: Attaching a gear to a SIM motor
The output is keyed for a 2mm x 2mm machine key.
You can purchase gears and hubs that are broached for the CIM output shaft at www.andymark.biz or broach another item yourself. Do not take the motor apart as that is an illegal modification and you will be unable to compete with that motor. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Attaching a small gear to Denso window motor? | grosh | Motors | 3 | 07-02-2010 14:49 |
| Attaching Denso motor adapter to the motor? | Billfred | Motors | 3 | 19-02-2007 20:07 |
| Attaching Mini-Bike motor to stock banebot gearboxes! | brennerator | Technical Discussion | 2 | 29-01-2007 17:03 |
| Drill motor in a Dual Motor gear box | MBosompra | Technical Discussion | 3 | 16-01-2004 21:37 |
| motor high gear/low gear switch... | archiver | 2001 | 6 | 23-06-2002 23:50 |
Threaded Mode