|
|
|
 It's still not about the robots. FIRST is about doing the right thing. - DonRotolo [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| It's still not about the robots. FIRST is about doing the right thing. - DonRotolo [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Wireless Setup
So here's our problem. We looked up the directions in the manual and followed all the steps correctly. But on the last step, when configuring the LINKSYS router, we have a problem. When trying to change the IP to 10.XX.YY.4. (10.30.80.4 in our case.) In the diagram, they have the IP set to 10.0.0.4 and underneath that, the diagram has changed along with it, but it doesn't change for us.
We decided to start fresh and reset the router and the game controller and re-configure the setup. This is our 2nd year in FIRST and we didn't have this problem last year. Any ideas? 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Gyro setup? | team2491 | Programming | 1 | 03-02-2010 15:54 |
| Wireless setup | Al3+ | Programming | 7 | 30-01-2010 14:30 |
| 2010 Wireless Setup | GunfighterJ | Programming | 12 | 16-01-2010 14:16 |
| Wireless Thermometer Wireless Data | C222 | Technical Discussion | 9 | 11-01-2010 08:01 |
| WI Setup Timelapse | Kevin Kolodziej | Regional Competitions | 2 | 08-03-2007 10:32 |
Threaded Mode