|
|
|
 Weren't you ever told Canada is backwards from the US? - Alex Cormier [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Weren't you ever told Canada is backwards from the US? - Alex Cormier [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
12-02-2010, 08:18
|
|||||
|
|||||
|
Re: Enabling yields one "Watchdog not fed" flash
If the +5 LED goes out, you probably have a power problem. Is the Digital Sidecar getting a good 12 volts from the Power Distribution board?
The first watchdog message you see might be coming from a timing glitch at the beginning of the camera code. If it only happens the one time, don't worry about it. The other occasional messages you see when you're on the Diagnostic tab are also something you don't need to worry about. (There might be a Driver Station software update that addresses them eventually.) |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Watchdog not fed | brianelite | C/C++ | 12 | 14-03-2010 14:43 |
| "watchdog not fed" error | Lumit | NI LabVIEW | 8 | 04-02-2010 18:45 |
| Enabling the robot from "developer". | lookitsnichole | Programming | 2 | 26-01-2010 21:14 |
| Watchdog not fed | ahudson | Programming | 1 | 22-01-2010 11:26 |
| "Thunderbirds" Vs. "Team America" Which one will rule the box office? | Elgin Clock | Chit-Chat | 3 | 07-09-2004 19:53 |
Threaded Mode