|
|
|
 I will follow FIRST's guidelines, as long as they conform with those of the English language. - artdutra04 [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I will follow FIRST's guidelines, as long as they conform with those of the English language. - artdutra04 [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#7
12-02-2010, 18:36
|
||||
|
||||
|
Re: Wiring The accelorometer
Well, that's the trouble.
It's not a PWM cable; it has 4 connections. 5v, GND, SCL, and SDA You can find the 4-pin header on the digital sidecar, right next to that female RJ-14 (modified phone jack). However, beware that on the accelerometer, they are in a different order than on the digital sidecar. You must solder a pigtail or header to the accelerometer. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wiring the wireless bridge to the robot | CHSboy | Electrical | 5 | 16-02-2009 23:30 |
| Gryo, Camera, Accelorometer, Ultrasonic, and Gear Tooth Sensors in one program | EHaskins | Programming | 8 | 22-05-2006 12:08 |
| Wiring the relay for the pnumatics | Placebo | OCCRA | 3 | 05-11-2002 23:04 |
| Wiring the actuator | archiver | 2001 | 5 | 23-06-2002 23:11 |
| What is the wiring for the FESTO valve? | Nuts4FIRST | Technical Discussion | 4 | 12-02-2002 17:14 |
Threaded Mode