|
|
|
 The few people who don't ever make mistakes are the same people who simply don't do anything. What people do after they make a mistake tells others what they are made of. - Andy Baker [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#8
12-02-2010, 18:58
|
|||
|
|||
|
Re: Need help w/ moving Camera Servo motors.
You've put the teleop code into RobotMain rather than into the Team Code Teleop function. While this isn't horrible, it does mean that the code in teleop, the drive code, and the camera update code are all running in parallel.
Far worse, the code to read the Joystick 1, Ope the Drive and read Joystick 2 are running in parallel with what I'm assuming is the Begin VI which is offscreen. This will likely mean that the joystick references are bad. Anyway, before you write additional code, why not move the existing stuff into Teleop? Also, if you have errors due to multiple opens or referencing before opening, the Diagnostics tab should list those errors. Greg McKaskle 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| HELP- Need Globe Motors ASAP | Brandon Holley | General Forum | 0 | 03-11-2009 10:37 |
| need help with motors | EagleMentor | Programming | 3 | 06-02-2009 17:37 |
| Need help with mini motors | R.C. | Motors | 11 | 03-07-2008 16:25 |
| help getting servo values from camera | ruddy | Programming | 12 | 30-11-2007 23:18 |
| Window Motors. Need help!!!! | Mohsin | Motors | 1 | 27-02-2004 13:05 |
Threaded Mode