cRIO requires independent restart from the robot to connect

[kavisiegel]

So this is an odd problem that we haven't even begun to get an edge on. I'm hoping this is one of those simple issues that you just can't find on google because of the wording.

Basically, what's happening is when we turn the robot on, the driver station sees the bridge and not the cRIO. Even after half hour of waiting, it still doesn't see the cRIO until I walk up to the robot and push the reset button on the unit its self. At that point we're online in about 10-20 seconds.

I'm concerned about what we'll do in competition, clearly we won't be able to run onto the field to get to the reset button.