|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
|
|||
|
|||
|
Re: Need a Full "Watchdog for idiots" explanation
Watchdog Status
Returns: Boolean Takes: Nothing This VI returns the current status of the Watchdog. 1 - Watchdog is being Fed and robot is enabled. 0 - Watchdog is dead. Robot is disabled. Watchdog Kill Returns: Nothing Takes: Boolean This VI can be used to immediately Kill the Watchdog. 1 - Kill the Watchdog immediately and disable the Robot. 0 - Keeps the Watchdog running. Watchdog Set Enable Returns: Nothing Takes: Boolean This VI can be used to Enable and Disable the robot. 1 - Enable the Watchdog. Requires that Watchdog must be fed in order to keep the robot enabled. 0 - Disable the Watchdog. Once disabled, the robot will not stop for anything, even if it gets caught in an infinite loop. It's recommended to have the robot on blocks when the Watchdog is disabled. Hopes this helps. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Hundreds of "Watchdog Expiration: System X" Errors | lollypop2020 | Programming | 21 | 18-02-2010 09:52 |
| Enabling yields one "Watchdog not fed" flash | Dylan5019 | Programming | 4 | 12-02-2010 23:45 |
| Help! Need a PAIR of 1.5" x 4" (to 6") cylinders, Bimba can't deliver | kmcclary | Pneumatics | 1 | 12-02-2010 13:53 |
| "watchdog not fed" error | Lumit | NI LabVIEW | 8 | 04-02-2010 18:45 |
| Need a "starter proposal" for new sponsor | Robocat1 | General Forum | 1 | 09-05-2006 18:48 |