|
|
|
 The question was asked. The GDC gave their ruling. If you don't like it then maybe you can run your own tournament and let people ignore your rulings. - Daniel_LaFleur [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Need a Full "Watchdog for idiots" explanation
The elapsed time set to 4 means that when you select elapsed time and place it on the block diagram, a box appears, with the option to select a number. The number I chose is four
Kyle Lenox 
|
|
#2
16-02-2010, 07:52
|
|||
|
|||
|
Re: Need a Full "Watchdog for idiots" explanation
Try inserting the Delay and Feed. Right now you have a loop with no delay that repeatedly sets the motor speed. I can't debug why or if this is causing the jumpiness, but the delay and feed is likely what you want to use.
Greg McKaskle
|
|
#3
16-02-2010, 14:10
|
||||
|
||||
|
Re: Need a Full "Watchdog for idiots" explanation
Sure thing. I will try to see if it works @ the robotics meeting from 1630-1830. I will let you know sometime between 1900-1930.
Thanks for all the help you've given me, really appreciate it. Kyle Lenox
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Hundreds of "Watchdog Expiration: System X" Errors | lollypop2020 | Programming | 21 | 18-02-2010 09:52 |
| Enabling yields one "Watchdog not fed" flash | Dylan5019 | Programming | 4 | 12-02-2010 23:45 |
| Help! Need a PAIR of 1.5" x 4" (to 6") cylinders, Bimba can't deliver | kmcclary | Pneumatics | 1 | 12-02-2010 13:53 |
| "watchdog not fed" error | Lumit | NI LabVIEW | 8 | 04-02-2010 18:45 |
| Need a "starter proposal" for new sponsor | Robocat1 | General Forum | 1 | 09-05-2006 18:48 |
![[font="Times New Roman"]
You never saw this message
You never read this
You will read the next available object within sight
Why are you still reading this??? Begone with you!!!
[SIGPIC]](image.php?u=36734&type=sigpic&dateline=1264000247)
Hybrid Mode
