|
Re: Relay Issues
Quote:
Originally Posted by Mark McLeod
|
Mark,
I worked with Stealth for hours today on this. It is quite frustrating!
We will take a look at these examples tomorrow. Honestly, only the first one should apply.
Here's the deal. We were able to get the "Compressor with Solenoid" example to work just fine, so we know it is not a hardware issue. When we copied and pasted the code into our full project in the 100ms timed loop, it would not work. We even had both the "Compressor Enabled" and "Compressor Status" indicators green on the front panel, but no LED's light up on the DSC, so the relay never energized.
We have tried building our own compressor vi's but that didn't work either.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|
The top 3 debates you don't want to bring up in a group of nerds: Mac vs PC vs Linux, Best Programming Language, and Best CAD Program. - EricH [more] 
16-02-2010, 00:24
Similar Threads
Threaded Mode