Need a Full "Watchdog for idiots" explanation

Greg McKaskle · #1 16-02-2010, 07:52

Try inserting the Delay and Feed. Right now you have a loop with no delay that repeatedly sets the motor speed. I can't debug why or if this is causing the jumpiness, but the delay and feed is likely what you want to use.

Greg McKaskle

K Lenox · #2 16-02-2010, 14:10

Sure thing. I will try to see if it works @ the robotics meeting from 1630-1830. I will let you know sometime between 1900-1930.

Thanks for all the help you've given me, really appreciate it.

Kyle Lenox

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hundreds of "Watchdog Expiration: System X" Errors	lollypop2020	Programming	21	18-02-2010 09:52
Enabling yields one "Watchdog not fed" flash	Dylan5019	Programming	4	12-02-2010 23:45
Help! Need a PAIR of 1.5" x 4" (to 6") cylinders, Bimba can't deliver	kmcclary	Pneumatics	1	12-02-2010 13:53
"watchdog not fed" error	Lumit	NI LabVIEW	8	04-02-2010 18:45
Need a "starter proposal" for new sponsor	Robocat1	General Forum	1	09-05-2006 18:48