Hundreds of more watchdog errors even wih the new update

[Acshi]

I would have posted this onto the thread of someone who had similar problems, but found that my situation was different enough.

I have just finished installing the new Labview update, cRio image, and driver station updates.

dsVersion 10.02.08.00
cRIO Image LabView - 20010_v20

I am not sure how much is related, but am also getting many errors along the lines of "
ERROR <Code> 1026 occurred at Property Node in
NI_FPGA_Interfaace.lvlib:NIFPGA System.lvlib:Async VI Agent.vi
LabVIEW: VI Reference is invalid
"

and although probably less related, I am not able to get a battery voltage reading in the ds either.

I have not made any changes to the vision system and can get video easily, though disabling it doesn't help either.
I have not made any changes in the watchdog code for teleop either.

I get the same symptoms in both teleop and autonomous modes, and the ds indicator switches between "... Enabled," "Watchdog Not Fed," and "No Robot Code."

Any help would be appreciated.

Thanks,