pic: 2177 Winch and PDB

[keehun]

Is the winch for the kicker?

Also, I agree with Vikesrock, the wiring is very neat.

See you guys at MN10000

[Jon Stratis]

The wiring isn't anywhere near done yet, which might explain why it's so clean Each of the individual boards is completely wired, but we have nothing running between the boards yet - although most of the wires are already made and just waiting to be put on the robot.

The winch is for lifting the robot - you can see the belt sticking right out the top between the two rollers. The kicker isn't pictured here, nor is our method for getting the belt to the top bar and hooking it on. Those... will have to be a surprise

One thing to note: The students have been amazingly flexible with the design this year. Originally the winch was going to be in the back, but when we started talking about hanging from on the bump instead, they redesigned the mounting to put it where you see here - in about 2 meetings. Likewise the kicker was completely redesigned very rapidly to integrate a "ball magnet" roller and an extra motor to give us some more force.