Coding Relay with Compressor

[Poke2201]

I changed the wiring to the PD board, now everything is on, EXCEPT FOR THE RSL LED!!!!


Update: Got RSL led on, Now I gotta get the Relay to actually turn on. Should I upload pictures of my begin vi? And I deleted the Compressor being enabled by a joystick button. Do I need to use enable compressor for anything?

[Greg McKaskle]

By the way, if you are going to develop on the classmate and your hands aren't the right size, try connecting a USB keyboard. I like connecting a mouse as well.

Greg McKaskle

[Mark McLeod]

Originally Posted by Poke2201

I changed the wiring to the PD board, now everything is on, EXCEPT FOR THE RSL LED!!!!


Update: Got RSL led on, Now I gotta get the Relay to actually turn on. Should I upload pictures of my begin vi? And I deleted the Compressor being enabled by a joystick button. Do I need to use enable compressor for anything?

What did you do to get the RSL back?

Just post the Begin.vi itself instead of a picture. It's easier to check that way. Ther's always something off the edge of the photo that can't be seen and should be.

You only need to use Compressor Start.

Compressor Enabled is only there to let you check if the compressor is on or not. It doesn't take any action. It's like getting the value of a button off a joystick Get.

[Poke2201]

Alright Ill post our code on it, I followed your examples in the begin.vi though

[Poke2201]

Begin vi.

[Poke2201]

Solenoid and compressor vi. doesn't work, watch dog times out too fast