|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
||||
|
||||
|
Re: Vision/AxisCamera2010.h
Quote:
Code:
AxisCamera &camera = AxisCamera::GetInstance(); camera.WriteResolution(AxisCameraParams::kResolution_160x120); camera.WriteBrightness(0); |
|
#17
|
|||
|
|||
|
Re: Vision/AxisCamera2010.h
attach a console to it so you can watch the boot progress, what error is it giving?
|
|
#18
|
||||
|
||||
|
Re: Vision/AxisCamera2010.h
Could you walk me through attaching a console?
|
|
#19
|
|||
|
|||
|
Re: Vision/AxisCamera2010.h
couple of ways to do it, one is flip the console out dip switch on the crio and attach to the serial port through a null modem to a computer that is running some console program (terminal.exe works or there is one built into windriver) second is to open up a net console, right click on the remote host in windriver (after connecting to it) then go to target tools and finally target console, a dialog box should pop up just hit ok,
i don't know how well the target console will work to watch the crio boot though, might connect to late, there is another way to do it but i don't know it so someone else will have to help you out with that best of luck Zme |
|
#20
|
|||
|
|||
|
Re: Vision/AxisCamera2010.h
Quote:
|
|
#21
|
||||
|
||||
|
Re: Vision/AxisCamera2010.h
I reinstalled all of the updates, and that helped. The camera code works now, and everything is considerably better.
There is a significant lag time on the camera to the DS display however. Is that normal? |
|
#22
|
|||
|
|||
|
Re: Vision/AxisCamera2010.h
to a point yes, how much lag are you talking?
|
|
#23
|
||||
|
||||
|
Re: Vision/AxisCamera2010.h
At its worst roughly from a second and a half to two seconds. In general though about half that.
|
|
#24
|
|||
|
|||
|
Re: Vision/AxisCamera2010.h
a half second i believe is the spec for the updated code for everything
try lowering the resolution, making sure the driverstation is not having its processing power strangled by windows power management, connect it via ethernet to the router, remove the live readout graphs from the dashboard if you have not already done so. other than that i don't know what to tell you good luck |
|
#25
|
|||
|
|||
|
Re: Vision/AxisCamera2010.h
All good advice, but from my testing, the charts on the dashboard do not add much load. I saw no difference with or without the charts.
Another thing that will help is to limit the FPS of the camera to what you need rather than telling it to go full 30fps. Greg McKaskle |
|
#26
|
|||
|
|||
|
Re: Vision/AxisCamera2010.h
we saw, (or thought we saw at least) a significant difference with and with out them, haven't run any tests though so can't say for sure
|
|
#27
|
||||
|
||||
|
Re: Vision/AxisCamera2010.h
My camera code has gone back to crashing my robot.
Doing this will build and download: Code:
AxisCamera *camera; Code:
AxisCamera &camera = AxisCamera::GetInstance(); It was working yesterday morning and it doesn't work now but I'm convinced it's a library problem. |
|
#28
|
||||
|
||||
|
Re: Vision/AxisCamera2010.h
try rebuilding (right click project>Rebuild) It often solves some of our problems
|
|
#29
|
||||
|
||||
|
Re: Vision/AxisCamera2010.h
Quote:
The situation has gotten worse, the Drivers Station LCD now also puts the robot in the same situation... help! |
|
#30
|
||||
|
||||
|
Re: Vision/AxisCamera2010.h
I tried to add the minimum camera code to the simple template to get camera to the dashboard. It builds, but when i download it it doesn't run because a symbol is missing: AxisCamera::GetInstance();
My includes are #include "WPILib.h" #include "Vision/AxisCamera.h" #include "Vision/HSLImage.h" My code calls: AxisCamera &camera = AxisCamera::GetInstance(); HSLImage image; camera.GetImage(&image); Are those right? You you have to call GetImage to get it to display on the dashboard? Has anybody had any luck with the updated wplib? Brian |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| AxisCamera2010.h not found | d4mation | C/C++ | 2 | 13-02-2010 14:05 |
| Vision Assistant | Sykan | NI LabVIEW | 1 | 17-01-2009 16:43 |
| Vision Illuminators | Qbranch | Programming | 3 | 10-01-2008 03:20 |
| n.e.r.d. vision feedback | MattK | General Forum | 15 | 05-07-2006 20:11 |
| n.e.r.d. Vision Episode 3! | MattK | General Forum | 15 | 05-07-2006 13:06 |