|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#19
|
|||
|
|||
|
Re: Vision/AxisCamera2010.h
couple of ways to do it, one is flip the console out dip switch on the crio and attach to the serial port through a null modem to a computer that is running some console program (terminal.exe works or there is one built into windriver) second is to open up a net console, right click on the remote host in windriver (after connecting to it) then go to target tools and finally target console, a dialog box should pop up just hit ok,
i don't know how well the target console will work to watch the crio boot though, might connect to late, there is another way to do it but i don't know it so someone else will have to help you out with that best of luck Zme |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| AxisCamera2010.h not found | d4mation | C/C++ | 2 | 13-02-2010 14:05 |
| Vision Assistant | Sykan | NI LabVIEW | 1 | 17-01-2009 16:43 |
| Vision Illuminators | Qbranch | Programming | 3 | 10-01-2008 03:20 |
| n.e.r.d. vision feedback | MattK | General Forum | 15 | 05-07-2006 20:11 |
| n.e.r.d. Vision Episode 3! | MattK | General Forum | 15 | 05-07-2006 13:06 |