|
|
|
 First check for any bind in the transmissions, especially chain. Next, check to see if the motors are O.K. Use code as a last resort. - Paul Copioli [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| First check for any bind in the transmissions, especially chain. Next, check to see if the motors are O.K. Use code as a last resort. - Paul Copioli [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: problem with logitech attack 3 controller
this is same exact thing that happened to me. I unplugged and replugged it a few times, until the values were correct, button inverted. That is as good as I got. If you get past that, please let me know
 
|
|
#2
19-02-2010, 20:25
|
||||
|
||||
|
Re: problem with logitech attack 3 controller
turns out that there never really was a problem with the actual controller but i made an error in the program. after plugging the controller into the joystick input example i found that the controller was working correctly and was able to fix the problem in the program.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Logitech attack 3 joystick problem | JP Carlin | Programming | 1 | 18-02-2010 21:50 |
| controller sensitivity for logitech gamepad | Hustler | NI LabVIEW | 2 | 02-02-2010 00:15 |
| Problem with Controller | rzienta | FRC Control System | 1 | 22-01-2009 12:05 |
| problem with speed controller | gaby1367 | Electrical | 11 | 14-05-2007 22:16 |
| Problem with the 2005 controller | Guy_E | Programming | 10 | 18-12-2006 01:38 |
Hybrid Mode
