KOP gearboxes and FisherPrice Motors

Free Willy · #1 19-02-2010, 19:09

Is there a way to attach a fisherprice motor to the gearbox from the KOP? Or is there a simple way to attach the fisherprice gearbox to the KOP gearbox?

R.C. · #2 19-02-2010, 19:15

If you have the time, the easiest and cleanest way to do it.

Would be to buy this:

http://andymark.biz/am-0347.html

This is a FP planetary which has the same mounting holes as a CIM, so it would mount to the Toughbox super easy.

-RC

EricH · #3 19-02-2010, 19:17

Not directly.

Try an AndyMark Planetary gearbox; it'll slow the FP down a bit, but should do the trick.

Or you could make an octagonal FP gearbox-shaft coupling and use that to drive the Toughbox.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Extra gearboxes needed, KOP sprockets and wheels available in Suffolk County, NY	dmlawrence	Kit & Additional Hardware	2	07-01-2008 10:24
Which pinions for FP motors and BaneBots 42 mm gearboxes?	Madison	Technical Discussion	3	23-01-2007 20:04
KOP Gearboxes and noises	David Sherman	Kit & Additional Hardware	8	29-01-2006 13:37
Motors and gearboxes from the kit	Kam1310	Motors	21	10-03-2005 22:26
Motors and gearboxes in the kit	Kam1310	Technical Discussion	1	09-03-2005 17:43