|
|
|
 Ask the right questions and you can get the right answers. - Chief Hedgehog [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Ask the right questions and you can get the right answers. - Chief Hedgehog [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: CAN Jaguar Malfunction
We tried many configurations with no avial. Even with the CAN default code and just the black Jaguar it failed. The cRio keeps reading the firmware as 0 and messing with the gray Jaguars firmwear versions. Usually its a number increasing from 258. Through a direct serial connection they cannot be controlled at all, until you reflash the firmware. Everything is up to date and we at a complete loss. One interesting firmware version that the software found is attached below.
|
|
#2
20-02-2010, 21:31
|
|||
|
|||
|
Re: CAN Jaguar Malfunction
Update the jags to 89, and download the latest release of the CANJaguar libraries (they updated recently). Try contacting Luminary Micro/TI if the problem keeps up
|
|
#4
21-02-2010, 18:32
|
|||
|
|||
|
Re: CAN Jaguar Malfunction
Try shifting the jag IDs up by one. ID 1 is factory default and not recommended to be used in the actual system. The cRIO might have trouble with an ID 1 jag
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Jaguar malfunction | Paul West | FRC Control System | 0 | 01-02-2010 23:20 |
| CAN Jaguar Synchronous Updates?? | Bryscus | Programming | 3 | 30-01-2010 16:13 |
| Getting started with CAN/Jaguar | CVassos | Programming | 1 | 27-01-2010 23:43 |
| CAN bus Jaguar intermittent errors | bear1511 | Programming | 1 | 27-01-2010 22:49 |
| Black Jaguar RS232->CAN - anyone? | oddjob | C/C++ | 12 | 22-01-2010 16:25 |
Hybrid Mode
