|
|
|
 Maybe my brain fog factor has expanded after wading through 1114's competition data sheet, so I cannot see the forest for the trees. - Bill_B [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Maybe my brain fog factor has expanded after wading through 1114's competition data sheet, so I cannot see the forest for the trees. - Bill_B [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
HELP solenoid trouble
well folks, we have a problem. our solenoid has voltage going out of the tabs. but our solenoid isn't working. any advice from anyone would be extremely useful.
|
|
#2
20-02-2010, 15:37
|
||||
|
||||
|
Re: HELP solenoid trouble
This is a problem that a lot of teams are experiencing. Make sure that if you are using this years KOP solenoids that you have the solenoid breakout on the cRIO connected to the 24v output on the Power Distribution Board; this years solenoids require 24v to operate and if 12v are used the lights on the solenoid will change but the internal rod will not move.
|
|
#3
20-02-2010, 16:01
|
|||
|
|||
|
Re: HELP solenoid trouble
If you are using the FESTO solenoids, they require at least 30psi to fire.
At least the solenoids that came in last year's kit did, I'm not entirely sure about this year's. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help Solenoid Programming | team2987 | NI LabVIEW | 13 | 20-02-2010 22:36 |
| Solenoid Help | aznbadboixx | Pneumatics | 0 | 15-02-2008 15:53 |
| Solenoid Help | Brigander | Programming | 2 | 14-02-2007 17:13 |
| Help with double solenoid | almsfan21 | Pneumatics | 2 | 30-01-2007 19:57 |
| Double Solenoid Help | doyler | Programming | 4 | 19-02-2005 11:36 |
Linear Mode
