Negatives not working.

Mark McLeod · #1 21-02-2010, 09:51

-0.5 is usually forwards. That's what your throttle sends.

It's probably the positive speed value that's causing you trouble.

Alexandstein · #2 21-02-2010, 12:49

What can I do to fix that?

We just tried having one value 0.5 and another value of 0.5 connected to a negate function, then connected to the motor speed control. Again, no luck.

Thanks for all help you can give.

Egg 3141592654 · #3 26-02-2010, 11:23

one of your motors could be wired backwards, in this case, just go to Begin and click true for isInverted(), of course, that is if this motor is an issue for all your states.

Lumit · #4 26-02-2010, 23:50

Quote:

Originally Posted by Alexandstein

What can I do to fix that?

We just tried having one value 0.5 and another value of 0.5 connected to a negate function, then connected to the motor speed control. Again, no luck.

Thanks for all help you can give.

A negate function?
Try just wiring a constant -0.5 to the motor, it worked fine for us.

EDIT: eh, reading your first post again, it looks like that's the first thing you tried

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jaguars not working	mama_tree	Electrical	8	01-02-2010 07:54
p2 not working?	Lone_Wolf92c	Programming	5	22-02-2008 08:49
IR Board Not Working (But NOT Fried)	itsme	Electrical	2	18-02-2008 06:11
Gyro not working	1594code	Programming	2	12-02-2008 18:16
Negatives in Binary	Michael Hill	Math and Science	12	10-02-2007 21:28