|
|
|
 Spelling mistakes make me sad...Almost as sad as not being able to go to Atlanta this year.. Almost. - Elgin Clock [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Spelling mistakes make me sad...Almost as sad as not being able to go to Atlanta this year.. Almost. - Elgin Clock [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Watchdog Problem
We are hyaving a problem with our watchdog. It times out every .5 - 2 seconds. The longer we run the robot the more time outs we have. We have tried disabling the watchdog and it still times out. Me and my dad believe that it is the System Watchdog. We have disabled the camera image on the dashboard and still no luck. Any one know how to fix this?
|
|
#2
21-02-2010, 14:28
|
||||
|
||||
|
Re: Watchdog Problem
Also every once in a while our code will just get stuck, like it's in a loop. But we only have one loop in our main.
|
|
#3
21-02-2010, 14:37
|
||||
|
||||
|
Re: Watchdog Problem
Also having issues with Watchdog time out errors. It does it in short spurts but turns our compressor off every time.
|
|
#5
21-02-2010, 14:50
|
||||
|
||||
|
Re: Watchdog Problem
280 did. It only started doing this 5 minutes ago or so (probably longer but yeah) and was working just fine before.
|
|
#6
21-02-2010, 15:06
|
||||
|
||||
|
Re: Watchdog Problem
I am pretty sure we installed the Driverstation update. under DS version in the diagnostics it says 2010.01.06.00 Is this correct?
|
|
#7
21-02-2010, 15:19
|
||||||
|
||||||
|
Re: Watchdog Problem
Quote:
|
|
#8
21-02-2010, 16:09
|
||||
|
||||
|
Re: Watchdog Problem
I checked my DS for a third time and its updated to 1.1
Were getting Watchdog Experation: System 2, User 7 Watchdog Experation: System 2, User 8 Watchdog Experation: System 2, User 9 Watchdog Experation: System 3, User 9 Watchdog Experation: System 3, User 10 Watchdog Experation: System 4, User 10 Watchdog Experation: System 4, User 11 Everytime we get one of those errors our system shuts down for a spit second or so. Last edited by JoeyTNT280 : 21-02-2010 at 16:14.
|
|
#9
21-02-2010, 18:55
|
|||
|
|||
|
Re: Watchdog Problem
The current printout in the Diagnostics doesn't identify the reason, so legitimate disabling of the robot shows up as a watchdog.
The user watchdogs are due to code not feeding the watchdog. System watchdogs are either due to a disable or due to a timing glitch caused by the DS. The second ones should be pretty rare, but we are still tracking down some reasons they can occur. Anyway, look for the reasons that your code is getting hung up. Put timing code in each and every loop and in the teleop subVI. Watch those either on your panels or on your dashboard to determine which loop is late. Greg McKaskle
|
|
#10
21-02-2010, 19:54
|
||||
|
||||
|
Re: Watchdog Problem
we are still getting Watchdog Timeouts even when we disable the watchdog. There aren't as many but we still get them.
|
|
#11
21-02-2010, 20:37
|
|||
|
|||
|
Re: Watchdog Problem
We're having the same issue as well.
http://www.chiefdelphi.com/forums/sh...ad.php?t=83116
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with System Watchdog | JSonntag | NI LabVIEW | 14 | 20-02-2010 11:31 |
| Watchdog Problem | daniel_3158 | Programming | 3 | 12-02-2010 15:22 |
| example project Autonomous mode Watchdog problem | qpang | NI LabVIEW | 0 | 08-02-2010 16:17 |
| Watchdog!?!?!?! | NC GEARS | General Forum | 38 | 23-01-2010 08:52 |
| Watchdog | darty | NI LabVIEW | 8 | 16-02-2009 09:11 |
Linear Mode
