Compressor won't start

[RKElectricalman]

I know I should start a new post for this, but since It's the same topic, I'd rather get help from the experienced few on this topic.

We have sort of the opposite issue, my compressor starts by the use of compressor->Start(); but does not automatically turn on. I've used a multimeter to test if the switch's state changes after reaching 115psi, and it does... but the compressor never starts.

Originally, I declared the compressor on digital one and relay one:

Compressor *compressor;

then:

compressor = new Compressor(1,1);

and when that failed, I tried changing the digital switch to DIO 5 (5,1) in the code and sidecar, and still nothing!. The relay I know for sure works properly, I've tested it, but I don't know what else it could be! Also, I'm pretty sure the switch is wired correctly... black and white pwm wires on the switch. Any Idea what could the problem be?

- Meezy