|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
How To wiring the pneumatic system to the CRio and Sidecar
Hello, I'm from team 2121, we are currently working on the pneumatic kicker. and there is one of the problems that we need to fix. That is how to wiring, connect and power the pneumatic kicker?
Please help us, we only have one day left before the shipping. Thank you. |
|
#2
|
||||
|
||||
|
Re: How To wiring the pneumatic system to the CRio and Sidecar
This isn't something to be doing the last day!!!!!!!! But I will help you anyways.
I found this site to be extremely helpful : http://www.teamdavinci.com/understanding_pneumatics.htm and use this: http://usfirst.org/uploadedFiles/Com...%20Rev%20-.pdf |
|
#3
|
||||
|
||||
|
Re: How To wiring the pneumatic system to the CRio and Sidecar
Also look at:
http://www.team358.org/files/pneumatic/ The Robotic Eagles have pneumatics figured out and solid. They have posted as much info as they can on their site. Good Luck! |
|
#4
|
|||
|
|||
|
Re: How To wiring the pneumatic system to the CRio and Sidecar
Thank you all for the helpful sources, I definitely read through these with my teammates,
Thank you |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How Precise and Accurate is the Analog In on the Crio? | Tom Line | FRC Control System | 11 | 12-04-2010 12:02 |
| How to connect the 12v solenoid to the cRIO and spike relay? | hannigan | Pneumatics | 3 | 13-02-2010 09:21 |
| How to connect the Workbench with the cRIO? | kentschool | C/C++ | 3 | 28-12-2009 16:03 |
| How do you run the pneumatics through the CRio w/o using the Jaguars and the Spikes | brreadd | Pneumatics | 3 | 20-11-2009 15:35 |
| The Program Compiles and Deploys, but the sidecar doesn't connect | pj174208 | Programming | 1 | 14-02-2009 18:26 |