Alternate Light Help

SeanTeags · #1 22-02-2010, 17:33

Hi guys,
We're having trouble with the rules. We were wondering if we were allowed to add another light to the system that turns on when a limit switch is activated. If you could point us to the rule and explain it to us, we would be really grateful.

Thanks!

EricH · #2 22-02-2010, 17:40

Where do you want to mount the light?

Also note that there are very few restrictions. The main one would be in <R02-A> and <R02-C>; if you're putting it on the operator panel, you'll probably be wanting to simply use the Classmate's dashboard.

DonRotolo · #3 22-02-2010, 22:08

For the most part, you should have no problems putting such an indicator light onto the robot. Unless it draws just a few milliamps, you'll need a spike to control it though. You cannot use the pneumatic solenoid module, even though it would be perfect, because of <R65>

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help--Program Light Stuck	NinJA999	Programming	7	07-02-2008 14:13
HELP WITH THE LED SIGNAL LIGHT	Bre92	Electrical	2	27-01-2008 22:31
help-Camera doesn't see the light	steve d	Programming	1	18-02-2007 15:30
Camera Looks away from light???? Help?	coldfusion1279	Programming	7	31-01-2007 11:34
Light Sensor Type, Please Help!	Alexander McGee	Electrical	7	20-11-2004 21:48