|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
how to connect the spike to the sidecar relay
this is jose from team 3080 and we really need help with our pneumatics. we dont know how to connect the spike to the sidecar relay can somebody please help us?
|
|
#2
|
||||
|
||||
|
Re: how to connect the spike to the sidecar relay
Send the PWM through the relay output on the sidecar
|
|
#3
|
|||
|
|||
|
Re: how to connect the spike to the sidecar relay
and how exactly do we manage to do this?
|
|
#4
|
||||
|
||||
|
Re: how to connect the spike to the sidecar relay
|
|
#5
|
||||
|
||||
|
Re: how to connect the spike to the sidecar relay
Connect a multi color pwm cable from the spike to the outputs marked "Relay" on the sidecar. On the sidecar, the black wire goes toward the edge of the sidecar. In the spike, the white wire goes to the "S" (signal) pin.
|
|
#6
|
|||||
|
|||||
|
Re: how to connect the spike to the sidecar relay
Only the Black (B) terminal is labeled on Spikes and Victors, so you would align based on B, (GND) which goes to the inside (Closer to the breaker), as opposed to the W (Sig1 or Sig2) which goes to the Outside of the Spike.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How To wiring the pneumatic system to the CRio and Sidecar | cardozo | Pneumatics | 3 | 22-02-2010 21:17 |
| How to connect the 12v solenoid to the cRIO and spike relay? | hannigan | Pneumatics | 3 | 13-02-2010 09:21 |
| Relay Ports on the Digital sidecar have no Power | 10uhingp | Electrical | 6 | 30-01-2010 14:00 |
| Attaching a standard car relay to the Digital sidecar | KillerGardevoir | Electrical | 4 | 02-08-2009 21:26 |
| The Program Compiles and Deploys, but the sidecar doesn't connect | pj174208 | Programming | 1 | 14-02-2009 18:26 |