It's ship date! Is YOUR robot ready?

[Dustin Shadbolt]

We got the major parts on and some basic programming on there. Now comes the fun part of coding the majority of the program. So I guess you can say we were "finished". After 5 hours in the shop tonight gosh. :\

[AnibaS]

It's packed up in the crate, and ready to be shipped!

Although I don't know if you would call it "complete;" our arm is being welded, so we're going to have to attach that at the competition (shouldn't take too long, just a few bolts.) The other major components are finished.

Now just to work on finishing programming, packing for the regionals, scouting and preparing for Chairmans...no sleep in sight!

[umangv620]

We had our hanging mechanism working yesterday, but the Kicker did not work. The Kicker works today, but the hanging mechanism does not work. BUT the problem is a mechanical problem, not a electrical or programming problem, so the mech team will fix that up and then we should be ready to rumble!

Drive works nicely, Autonomous coded(but haven't tested it yet), Limit Switches work, Solenoids work, Air Compressor works, Camera works. Basically Programming is finished! Few electrical tasks left, but mostly fixed. Few mechanical tasks left, which will be fixed eventually.

Only problem is our robot going over the bump(which is kind of a big deal). We still need to work on this(probably with out test robot.

We'll figure everything out, and rock the NJ regional! GO TEAM 1403!!