Camera Image on Driver Station/Dashboard

[Greg McKaskle]

If you open Begin.vi, it already sets about six camera parameters. I don't actually see a Set Property VI for setting the camera rotation, though. It would be pretty easy to build.

Do you want this for processing on the robot, or for display on the dashboard. I'd suggest leaving it alone on the robot and simply flipping the resulting X,Y. Then rotate it on the dashboard. This will consume less cRIO CPU.

Greg McKaskle

[helenajoy]

We woulkd like to have it for the dashboard.

Where can I chane the x and y, and how do I flip this image?

[Greg McKaskle]

To rotate or modify it for the dashboard, use the IMAQ functions in Vision>>Vision Utilities>>Image Manipulation, and either the IMAQ Symmetry to mirror and flip, or the IMAQ Rotate to spin.

Greg McKaskle

[KyleWishnok]

if you loosen the screw on the post of the camera you can just put it right side up with the mount on the top opposed to reprograming it

[helenajoy]

I found those VIs. Where in my code would it be best to place it?

[kamocat]

You want to place it in your Dashboard, after the "get image on PC" vi.