PROGRAMMING HELP PLEASE !

[kws4000]

common mistake: is the cable plugged into #2 on the cRIO? it should be #1. have you downloaded the new 2.1 labview and 1.1 ds updates? reformated cRIO(v20), reloaded code, rebooted?

[whcirobotics]

Originally Posted by kws4000

common mistake: is the cable plugged into #2 on the cRIO? it should be #1. have you downloaded the new 2.1 labview and 1.1 ds updates? reformated cRIO(v20), reloaded code, rebooted?

Yes we gave plugged it into port #1 and yes we have updated to 2.1 update, BUT 1.1 does not update. If you could please be kind enough to guide us through how to update the DS, if thats the reason the C-RIo isnt giving any packets to the classmate.

[kws4000]

first, do you have 1.1 DS? once you do, just click autorun.exe. Long time to install it's componenets.

[whcirobotics]

IT DOES NOT TAKE A LONG TIME TO INSTALL. IT JUST COMPLETES FAST

DS IS NOT UPDATED

[kws4000]

does the dashboard have a gyro compass on it? if yess, then it is updated.

[whcirobotics]

OO i already had the ds updated b4, yes it has the compass, but when i entered the driver station:
I get this error " There is an ip address conflict with another system on the network"

WE have not changed the ip but it just happened i dont know why please help much appreciated

[kws4000]

there should only be the classmate, router, bridge, cRIO, and camera(optional). wild card: any other wireless network in area that for some freak reason has the same IP addresses?

[whcirobotics]

Originally Posted by kws4000

there should only be the classmate, router, bridge, cRIO, and camera(optional). wild card: any other wireless network in area that for some freak reason has the same IP addresses?

no we have only the C-Rio with the modules in the correct spot, the classmate which is not broken from all the stress we put on it, the Bridge is connected, and the camera is connected also atm. I do not know any other devices with the same ip address . But for some freaking reason it was working before and suddenly something went horrifically wrong internally, which i got to know about as i came back from eating. So I do not know what happened.

Please if you have any suggestions as to get it to communicate please help, time is golden. only 30 minutes help much appreaciated

[whcirobotics]

tnx for all the help, our time is up. We packed it up. unfortuanetetly did not finish

[Alan Anderson]

Originally Posted by whcirobotics

yes i have:Classmate :
IP: 10.15.14.10
SUBNET 255.0.0.0
GATEWAY: 10.15.14.4

You should never have to set the Classmate's IP address. The Driver Station application sets it for you when you configure it with your team number. But if you've indeed managed to set it to 10.15.14.10, you need to fix it immediately -- it's supposed to be 10.15.14.5 instead.

(The router is probably configured to give out dynamic addresses starting at 10.15.14.10, and that would be why you got an IP address conflict from some other system that connected to the router.)