Go to Post Nuts for breakfast!!! Thats just screwy!!! I guess you could just bolt it down..... - Wayne C. [more]
Home
Go Back   Chief Delphi > Technical > Pneumatics
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #12   Spotlight this post!  
Unread 24-02-2010, 19:08
vamfun vamfun is offline
Mentor :Contol System Engineer
AKA: Chris
FRC #0599 (Robodox)
Team Role: Engineer
 
Join Date: Jan 2009
Rookie Year: 2003
Location: Van Nuys, California
Posts: 182
vamfun is a glorious beacon of lightvamfun is a glorious beacon of lightvamfun is a glorious beacon of lightvamfun is a glorious beacon of lightvamfun is a glorious beacon of lightvamfun is a glorious beacon of light
Send a message via AIM to vamfun
Re: Solenoid Control Valve Question

Quote:
Team 39 used a much simpler system where three valves fed into one pneumatic cylinder."
At the Sat scrimmage I saw what Matt spoke of... don't remember the team.

One team had ordered a large bore cylinder from BIMBA that had multiple ports feeding each end of the cylinder which allowed more than one valve to feed the big mother hence increasing the effective flow rate.

This is probably legal based upon the rule:
D:...Cylinders may be of any configuration, and may be of any size up to a maximum of 24-inch stroke and 2-inch diameter.

but I'm concerned that it violates the intent of the valve port/Cv size limits.

Any thoughts?

Last edited by vamfun : 24-02-2010 at 20:09.
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Single vs double solenoid valve operation Scott358 Pneumatics 0 29-01-2005 11:47
SMC Double Solenoid Valve Assembly Dave Kempskie Pneumatics 0 29-01-2003 13:34
Will trade for double solenoid valve archiver 2001 2 24-06-2002 00:33
Dismantle Solenoid valve? archiver 2001 2 23-06-2002 23:34
Single Solenoid Valve SMC Chubtoad Technical Discussion 3 20-01-2002 15:16


All times are GMT -5. The time now is 23:36.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi