Gyro Wiring? - Chief Delphi

In any case, don't beat yourself up over it. Only 24 teams get to play in elimination rounds. Sometimes you're in the 24, and sometimes you aren't. - jgannon [more]

		Chief Delphi > Technical > Electrical
Gyro Wiring?

Thread Tools

Rate Thread

Display Modes

24-02-2010, 21:12

BEEKMAN

Registered User

AKA: Brendan McLeod

FRC #0190 (Gompei and the Herd)

Team Role: Mentor

Join Date: Feb 2009

Rookie Year: 2008

Location: Londonderry, NH

Posts: 138

Re: Gyro Wiring?

Quote:

Originally Posted by Mike AA

The gyro needs to hook up using a 3 wire "pwm cable". Solder either the pins of the pwm cable or a 3pin female header (don't know where to get them right off hand). The outer edge is negative (black wire), you don't need to hook up both sets just the outer set that says "gyro". The female end goes to the digital I/O default is port#1 if you have it hooked up for use on the default driverstation diaplay.

No..the gyro goes to the ANALOG I/O Module on the CRio...make sure you set the sensitivity to .007 V Deg/sec

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wiring Gyro	PingPongPerson	Electrical	1	11-02-2010 21:27
Gyro wiring?	Phoenix Spud	Electrical	7	12-01-2009 13:58
Help: wiring ADXRS300EB Gyro Eval Boards	de_	Sensors	3	18-03-2008 22:21
2003 Gyro Wiring Harness	DukesAZ	Electrical	3	03-02-2005 18:20
2003 Gyro Wiring Harness	DukesAZ	Technical Discussion	3	03-02-2005 18:20

All times are GMT -5. The time now is 07:20.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.