pic: Cyber Blue - R2V1

Chris Fultz · #1 24-02-2010, 21:39

Quote:

Originally Posted by lenny8

what is the frame made out of?

1" aluminum, welded, anodized Cyber Blue.

Some is 1/16" wall, some is 1/8" wall, depending on needs for the specific area. I think the frame weighed about 18 pounds total, and is basically a 27' x 27' x 15-1/2" cube.

lenny8 · #2 24-02-2010, 22:23

Quote:

Originally Posted by Chris Fultz

1" aluminum, welded, anodized Cyber Blue.

Some is 1/16" wall, some is 1/8" wall, depending on needs for the specific area. I think the frame weighed about 18 pounds total, and is basically a 27' x 27' x 15-1/2" cube.

we knew that 80 20 bot couldn't be your real bot sneky sneky

Ryan Dognaux · #3 25-02-2010, 11:59

Looking good Cyber Blue! At first glance the robot looks very simple, but at closer examination you have the swerve modules and your kicking gearbox mechanism - there's a lot under the hood on this one.

Taylor · #4 25-02-2010, 13:30

Quote:

Originally Posted by Ryan Dognaux

there's a lot under the hood on this one.

You have no idea how big of an understatement that is. Their PDB is almost full.
Once again, incredible job, see you at BMR.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: Cyber Blue 2008	Ben Martin	Extra Discussion	9	05-03-2008 20:36
pic: Cyber Blue with Hillary 1	Chris Fultz	Extra Discussion	22	07-01-2008 02:18
pic: Cyber Blue with Hillary 2	Chris Fultz	Extra Discussion	7	04-01-2008 16:59
Thank you Cyber Blue & Cyber Knights!	Jasmin	Thanks and/or Congrats	1	26-04-2005 20:54
pic: Cyber Blue 234 teaser	CD47-Bot	Robot Showcase	9	08-02-2004 19:32